CE compliant · Machinery Directive 2006/42/EC · EN 1090 certificationDesigned and manufactured in Italy for over 20 years
Home / Catalogue / Trestles range / Certified fixed trestles

Certified fixed trestles

Fixed steel support trestles, certified to CE 2006/42 and delivered with capacity plate, serial number, manual and certificate. Standard capacities from 500 to 15,000 kg, plus custom manufacture to your drawing, in our Milan workshop.

Certified fixed trestles

Workshop trestles and trestles with supports

The UPN 120 trestle with bench rubber surface for finished parts, the trestles with roller or fork supports for shafts and tubes, and the custom-built version to the drawing of the part.

All models

Certified fixed trestles: models, capacities and adjustment

ModelRated capacityAdjustmentTravel
Certified support trestles — 2,000 kg capacity2,000 kg——
Certified support trestles — 5,000 kg capacity5,000 kg——
Certified support trestles — 10 t capacity10,000 kg——
UPN 120 workshop trestle with rubber top———
Custom trestles with roller or V-block supports———
All models

Certified fixed trestles: models, capacities and dimensions

ModelRated capacityStructureSupport topUse
Certified 500 kg support trestle, A CA 0,5500 kg per trestlepainted steel——
Certified 1,000 kg support trestle, A CA 11,000 kg per trestlepainted steel, braced uprights——
Certified support trestles — 2,000 kg capacity2,000 kg per standpainted steel, cross-braced uprightstubular beam with end capsmedium steelwork, machining and storage
Certified support trestles — 5,000 kg capacity5,000 kg per standsteel, larger sections than the 2,000 kg model—down to the base, widened plate feet
Certified support trestles — 10 t capacity10 t (10,000 kg) per stand—load-spreading sole plates under the feetfork pockets for forklift handling
UPN 120 workshop trestle with rubber top—UPN 120 section, steelbench rubber 5 mm thick—
Custom trestles with roller or V-block supportsstandard 1,000 kg, made to measure 500–10,000 kgrollers, V-block, flat top——
Certified custom-built support trestle, from 500 to 15,000 kgfrom 500 to 15,000 kg, custom-builtpainted steelsteel, wood, rubber, rollers or forks—
All series

A CA series: capacities, dimensions and weights

TypeRated capacityLHBSupport baseWeight
A CA 0,5500 kg1.200 mm900 mm700 mm50 mm26 kg
A CA 11,000 kg1.500 mm900 mm700 mm50 mm29 kg
A CA 22,000 kg1.500 mm900 mm700 mm50 mm32 kg
A CA 33,000 kg1.500 mm900 mm700 mm50 mm47 kg
A CA 55,000 kg1.500 mm900 mm700 mm50 mm50 kg
A CA 77,000 kg2.000 mm900 mm1.000 mm100 mm90 kg
A CA 1010,000 kg2.000 mm900 mm1.000 mm100 mm122 kg
A CA 1515.000 kg2.000 mm900 mm1.000 mm100 mm140 kg

Attollo catalogue data: L is the top beam length, H the height, B the base width. Capacity is per single trestle; they are used in pairs.

How to choose

How to choose certified fixed trestles

Capacity is per trestle

Two trestles support twice as much: for a 4,000 kg part, two A CA 2 are enough. Capacity must be referred to the heaviest part, with a margin if the load is set down off-centre by the overhead crane.

The top beam

Length L is chosen on the width of the part: 1,200 mm for the bench, 1,500 mm for medium steel fabrication, 2,000 mm from 7 tonnes upwards, with a wider base for stability.

The support surface

Bare steel for steel fabrication; bench rubber, marine plywood or lining on request for finished parts that must not be marked; rollers or forks for shafts and tubes to be turned or held.

Floor and moving

The plate feet rest on the floor without anchoring; from 10 tonnes the load-spreading pads distribute the load and the fork pockets allow the trestle to be moved with a forklift. For frequent height changes, the collection of adjustable trestles.

Frequently asked questions

Certified fixed trestles: the most common questions

List price from 450 € + VAT for the 500 kg and from 500 € for the 1,000 kg; the UPN 120 trestle from 700 €, the custom-built version from 700 €. Higher capacities are confirmed in the quotation.

See also

Other collections in the Trestles range

Call nowRequest a quote