Vacuum lifters: for sheet metal, glass, stone, wood and sandwich panels
Vacuum lifters to lift plates and panels without marking them, hung from a jib crane, overhead crane, hoist or forklift: electric, pneumatic, battery or self-priming. Six collections by material, with capacities from the 40 kg of pump lifters to the 8,000 kg of telescopic beams for sheet metal, all CE certified to 2006/42/EC. Also available for hire.

A safe grip on any surface
Vacuum lifters grip by means of the negative pressure created inside the reservoir, keeping the grip safe even if the power supply is interrupted. They are fitted as below-the-hook equipment to jib cranes, overhead cranes and hoists.
Depending on the material and the dimensions we design vacuum lifters with one or more pads, with manual, pneumatic or powered tilting and manual or powered rotation.

Up to 20 metres of panel, battery models too
Many vacuum lifters are born from a specific request: vacuum lifting beams for insulated sandwich panels up to 20 metres, vacuum lifters for sheet metal up to 12/14 metres with hydraulic or pneumatic tilting, self-contained battery versions with no compressor, and fork-mounted vacuum lifters for forklift trucks.
- Electric pump unit 380/220 V or compressed air operation
- Manual pump vacuum lifters for smooth surfaces, no power needed
- Vacuum lifter hire for insulated panels: vertical, horizontal and lengthwise
What you'll find in the catalogue
Each entry leads to the pages with photographs, dimensions, capacities and data sheet. Prices are list prices, excluding VAT.

Vacuum lifters
8 productsSee products and prices
Ventose per lamiere
10 productsSee products and prices
Ventose per pannelli sandwich e legno
8 productsSee products and prices
Ventose per vetro
6 productsSee products and prices
Ventose per marmo, pietra e gres
5 productsSee products and prices
Ventose manuali e a batteria
5 productsSee products and prices
Ventose autoadescanti senza alimentazione
21 productsSee products and prices
Vacuum range
Discover the rangeVacuum lifters built by Attollo
Click to enlarge the photographs of equipment we have delivered.













Every piece of Attollo equipment is designed and built to Machinery Directive 2006/42/EC and to EN 13155 for below-the-hook lifting attachments, and is supplied with CE marking, declaration of conformity and an operating and maintenance manual. We also handle the mandatory periodic inspections required by Italian law (Legislative Decree 81/08).
Vacuum lifters: the most common questions
It depends on the material and the number of grips: fixed-frame vacuum lifters for sheet metal run from 250 to 1,500 kg and telescopic beams reach 8,000 kg; for glass up to 800 kg; for sandwich panels from 200 to 400 kg; VMS self-priming lifters from 100 to 2,400 kg; manual pump lifters from 40 to 220 kg. Capacity is sized on the weight and format of the plate.
The lifter adheres to the surface with the vacuum created by an electric pump unit, a compressed-air ejector or, in self-priming lifters, by the movement of the hook itself. A reservoir maintains the vacuum even if the supply fails and the vacuum gauge shows the grip before lifting. It is fitted under the hook of a crane, overhead crane or hoist, with manual, pneumatic or electric tilting and rotation.
For sheets up to 1,500 kg the fixed-frame lifters with 4, 6 or 8 pads, pneumatic or electric; for long sheets and heavy packs the fixed and telescopic beams up to 8,000 kg; for the forklift the fork-mounted battery lifter; with no power and no air, the VMS self-priming lifters. See the sheet-metal vacuum lifters collection.
The 200 kg four-pad lifters for the warehouse, the battery site lifters with double vacuum circuit and the 400 kg vacuum lifting beam for laying roofs, the 180° turnover lifter for panels delivered stacked upside down. See the sandwich panel and wood collection.
On steel, stainless and aluminium sheets, even oiled or laser-cut; glass, crystal and insulating glass units; marble, granite, stone and large-format porcelain tiles; wood, MDF, chipboard and melamine-faced panels; insulated sandwich panels; precast concrete elements. For each material the seal suited to the surface is chosen.
Yes: every lifter is designed to Machinery Directive 2006/42/EC and standard EN 13155 for lifting accessories, with vacuum gauge, reservoir and, where required, double vacuum circuit and alarms; it is delivered with CE marking, capacity plate, declaration of conformity and manual.
Got a load to lift? Let's talk.
Tell us the material, the weight and the space you have: we will propose the right technical solution, CE certified.
