Jib cranes and suspended systems
Versatile and dependable, for single workstations or large spaces. Designed to fit cramped working areas, low ceilings and obstacles where standard systems cannot reach.
Pillar-mounted, wall-mounted or on a fork-liftable base
The pillar-mounted crane comprises pillar and arm, with three floor-fixing systems: a foundation frame cast into the footing, an oversized plate with chemical anchors, or a ballast box that a forklift truck can move.
The wall-mounted crane is fixed to an existing column by clamping with brackets and counter-brackets or with chemical anchors. The version with a palletised base moves between workstations on a forklift truck, without drilling the floor.
- Standard 270° slewing, extendable to 300° or continuous 360°
- Special configurations with two or three arms to serve several workstations
- Ball-bearing pivot for smooth slewing, with end-stop brackets
The right arm for every working area
On track profile for smooth, precise handling up to 1,000 kg, on a tie-rod or cantilever beam for higher capacities and maximum hook travel, articulated to work around columns and machinery, extendable for the tightest spaces.
With 360° powered slewing the capacity reaches 30,000 kg: the answer for boat hauling and for the heaviest loads, in stainless steel too.
Aluminium gantry and jib cranes: 24 kg, one operator
The dismountable aluminium jib crane weighs just 24 kg and can be assembled safely by one person: ideal for treatment plants, seafront installations and sites that are hard to reach.
The range is completed by the aluminium gantry crane adjustable in height and width up to 2,000 kg, the tripod from 250 to 3,000 kg and light suspended single- and double-girder overhead cranes on track profile.
- Dismountable and transportable, with various support bases
- Kito and RWM electric chain hoists, three-phase and single-phase, with inverter
- Two coats of anti-rust paint and special treatment for marine climates
Jib cranes built by Attollo
Every installation is sized on the customer's loads, spaces and duty cycles. Click to enlarge.
Every piece of Attollo equipment is designed and built to Machinery Directive 2006/42/EC and to EN 13155 for below-the-hook lifting attachments, and is supplied with CE marking, declaration of conformity and an operating and maintenance manual. We also handle the mandatory periodic inspections required by Italian law (Legislative Decree 81/08).
Jib cranes: the most common questions
Attollo jib cranes are built to measure with capacities ranging from a few tens of kilos up to several tonnes. Capacity depends on the outreach and the height under the hook: the greater the outreach, the more the structure is sized to guarantee stability and CE compliance.
The pillar-mounted crane is free-standing, fixed to the floor on its own pillar, and slews through up to 360°. The wall-mounted crane is fixed to a column or a wall, takes up less floor space but generally slews through 180° and has a shorter outreach.
Yes. All the cranes are designed and built to Machinery Directive 2006/42/EC and to the technical standards in force, and are supplied complete with CE marking, declaration of conformity and operating and maintenance manual.
Got a load to lift? Let's talk.
Tell us the material, the weight and the space you have: we will propose the right technical solution, CE certified.