Height-adjustable trestles
Height-adjustable support trestles: from setting the feet (standard 100 mm travel) through to telescopic versions, by crank or with a cordless driver, to change height with the piece already resting. All CE certified with a capacity plate.
Continuous adjustment by crank or cordless screwdriver
The screw with integrated gearbox changes the height continuously, even with the part resting on it: crank-operated at 500 and 1,000 kg, with cordless screwdriver from 2,000 kg, up to the 20,000 kg assembly trestle with perforated plate.

Crank height-adjustable stand
The height changes by turning the crank: fine adjustment even with the piece resting.

1,000 kg mobile trestle with hand crank
Turn the crank and the height rises, even with the workpiece already resting on it.

1,000 kg hand-crank trestle with perforated top
Same crank, but the top has a 16 mm hole grid: the workpiece is clamped, not just rested.

Adjustable 2,000 kg stand with cordless driver
Powered adjustment: height up and down with the driver, up to 2,000 kg.

2,000 kg mobile trestle with cordless screwdriver
Two tonnes that go up and down with a cordless screwdriver, on castors.

Mobile stand with perforated top, adjustable 750–1,150 mm
On four braked castors, stepless height from 750 to 1,150 mm with a cordless driver.

20,000 kg assembly trestle with perforated top
Twenty tonnes on two supports, and the height still changes with a screwdriver.
Step adjustment: telescopic, pin, 7,000 kg
Telescopic legs with locking pin, custom pin adjustment from 250 to 20,000 kg and the reinforced 7,000 kg trestle adjustable from 800 to 1,200 mm: the height is changed with the trestle unloaded and stays mechanically locked.

Height-adjustable telescopic trestles
The telescopic pair: wide travel and pin locking for pieces at any height.

Made-to-measure stand with pin adjustment
Built to your height: capacities from 250 to 20,000 kg and a support up to 3.5 metres.

7,000 kg trestle, height adjustable 800–1,200 mm
The heavyweight of the range: 7 tonnes of capacity with height adjustable from 800 to 1,200 mm.
Welding and levelling
The welding trestle with perforated plate (system 16, 22 or 28), the adjustable welding support and the trestle with 100 mm adjustable feet for uneven floors.

2,000 kg height-adjustable welding trestle
The perforated welding top brought to height with a screwdriver: you weld standing upright.

Height-adjustable welding support stand
The support for fabrication and welding: it brings the joint to working height.

Trestle with height-adjustable feet
Feet set with a spanner (100 mm travel) to level up on any floor.
Height-adjustable trestles: models, capacities and adjustment
| Model | Rated capacity | Adjustment | Travel |
|---|---|---|---|
| 7,000 kg trestle, height adjustable 800–1,200 mm | 7,000 kg | — | — |
| Crank height-adjustable stand | — | hand crank, under load | — |
| Adjustable 2,000 kg stand with cordless driver | 2,000 kg | cordless driver (or by hand) | — |
| Height-adjustable welding support stand | — | settable height | — |
| Height-adjustable telescopic trestles | — | telescopic slide-out with pin | — |
| Trestle with height-adjustable feet | — | — | 100 mm standard (more, to drawing) |
| Made-to-measure stand with pin adjustment | — | by pin, in steps (mechanical locking) | — |
| Mobile stand with perforated top, adjustable 750–1,150 mm | 2,000 kg | self-locking spindle, with cordless driver or crank | — |
| 1,000 kg mobile trestle with hand crank | 1,000 kg | by hand crank, continuous, with integrated gearbox | — |
| 1,000 kg hand-crank trestle with perforated top | 1,000 kg | by hand crank, continuous, with integrated gearbox | — |
| 2,000 kg mobile trestle with cordless screwdriver | 2,000 kg | by cordless screwdriver, continuous, integrated gearbox | — |
| 2,000 kg height-adjustable welding trestle | 2,000 kg | by cordless screwdriver, continuous | — |
| 20,000 kg assembly trestle with perforated top | 20,000 kg | by screw, continuous, with cordless screwdriver | — |
Height-adjustable trestles: models, capacities and dimensions
| Model | Rated capacity | Adjustment | Under load | Top |
|---|---|---|---|---|
| Crank height-adjustable stand | — | hand crank, under load | — | aligning pieces across several supports |
| 1,000 kg mobile trestle with hand crank | 500 · 1,000 kg | by hand crank, continuous, with integrated gearbox | yes, at full rated load | 100 · 120 · 150 · 175 · 200 cm |
| 1,000 kg hand-crank trestle with perforated top | 500 · 1,000 kg | by hand crank, continuous, with integrated gearbox | yes, at full rated load | perforated, 16 mm hole system |
| Adjustable 2,000 kg stand with cordless driver | 2,000 kg | cordless driver (or by hand) | — | — |
| 2,000 kg mobile trestle with cordless screwdriver | up to 2,000 kg | by cordless screwdriver, continuous, integrated gearbox | yes, at full rated load | 100 · 120 · 150 · 175 · 200 cm |
| Mobile stand with perforated top, adjustable 750–1,150 mm | 500 · 1,000 · 2,000 kg (5,000 kg on request) | steplessly adjustable from 750 to 1,150 mm | — | steel 1,200 × 200 × 20 mm with perforated plate |
| 20,000 kg assembly trestle with perforated top | up to 20,000 kg | by screw, continuous, with cordless screwdriver | — | perforated, 16 mm hole system |
| Height-adjustable telescopic trestles | — | telescopic slide-out with pin | — | in pairs |
| Made-to-measure stand with pin adjustment | 250 · 500 · 1,000 · 2,000 · 5,000 · 12,000 · 20,000 kg | by pin, in steps (mechanical locking) | — | from 50 to 350 cm |
| 7,000 kg trestle, height adjustable 800–1,200 mm | 7,000 kg | adjustable 800–1,200 mm | — | — |
| 2,000 kg height-adjustable welding trestle | up to 2,000 kg | by cordless screwdriver, continuous | yes, at full rated load | perforated welding top, system 16 · 22 · 28 |
| Height-adjustable welding support stand | — | settable height | — | welding and fabrication |
| Trestle with height-adjustable feet | — | 100 mm standard (more, to drawing) | with a spanner, removable foot | — |
Adjustment systems compared
| Adjustment | How the height is changed | With the load in place | Capacities | When to choose it |
|---|---|---|---|---|
| Crank-operated with gearbox | continuous, by turning the crank | yes, at full load | 500 · 1,000 kg | aligning long workpieces on several supports |
| With cordless screwdriver | continuous, hex drive on the screw | yes, at full load | 2,000 kg (20,000 kg for the assembly model) | changing the height many times a day |
| Telescopic with locking pin | in steps, by extending the legs | no, with the trestle unloaded | per pair, as shown on the plate | repeatable heights, low cost |
| Custom pin adjustment | in steps, pin in the hole | no, with the trestle unloaded | 250 – 20.000 kg | height changed rarely and locked for long periods |
| Adjustable feet | 100 mm travel, with spanner | yes, for levelling | as shown on the plate | uneven floors, jigs and measuring lines |
Capacities are per single trestle; models with gearbox allow adjustment at full load within the rated limits.
How to choose height-adjustable trestles
How often the height changes
If the height changes with every workpiece, continuous crank or screwdriver adjustment is required, which can also be done with the load in place; if it changes rarely, the cheaper stepped adjustment, telescopic or with pin, is sufficient.
Loaded or unloaded
Only models with screw and integrated gearbox can be adjusted at full load: to level a long workpiece on several supports, the cranks are turned without lifting it again. Telescopic and pin models are adjusted unloaded.
The support surface
Bare steel for hard support, wood for finished parts, perforated plate (system 16, 22 or 28) to clamp the workpiece with angle brackets and clamps during tack welding and welding.
Capacity and stiffness
Above 5 tonnes, stiffness matters more than capacity: the reinforced 7,000 kg model and the 20,000 kg assembly trestle are sized so that the support surface does not deflect during the work.
Mobility
Manoeuvring castors, spring-loaded castors that retract under load, levelling feet and a graduated scale in the leg are optional accessories on all custom models.
Height-adjustable trestles: the most common questions
List prices: the trestle with adjustable feet starts from 600 € + VAT, telescopic models from 900 €, the 2,000 kg model with screwdriver from 1,000 €, the 7,000 kg and crank-operated models from 1,100 €, the welding support from 1,200 €; custom models are quoted on the configuration.
Yes, on models with screw and integrated gearbox (crank-operated or with screwdriver), at full load within the rated limits; on telescopic and pin models the height is changed with the trestle unloaded.
The 7,000 kg model from 800 to 1,200 mm, the mobile model with perforated plate from 750 to 1,150 mm, the adjustable feet 100 mm; on custom models the range is defined on the workpiece.
No: all adjustments are mechanical, by screw or pin, with no oil or hydraulic units to maintain.
Yes: built to the Machinery Directive 2006/42/EC, supplied with capacity plate, serial number, manual and CE certificate.
