Rams and reel handlers
Rams and attachments for handling reels, coils and bodies with a central eye. The rams are made with a hot-shrunk joint and a strength never less than three times the rated capacity; alongside them, the special builds: versions for high-temperature bodies, hydraulic expanding mandrels and cradles for pedestrian stackers.
Coil booms for reels and coils
The coil boom hooked onto the carriage with a shrink-fit and a safety weld, the fork-mounted twin boom for two reels per cycle, the version with round-bar mounting for trucks without an ISO/FEM carriage, and the build for high-temperature bodies.
Hydraulic gripping of reels
The expanding mandrel with hydraulic rotation for plastic reels, with no contact with the surface, and the fork-mounted hydraulic cradle for loading reels with the pedestrian stacker.
Boat booms
The pair of padded arms that supports the hull for hauling, launching and moves within the yard: original design in service since 2006.
Rams and reel handlers: models, capacities and dimensions
| Model | Assembly | Build | Use | Guarantees |
|---|---|---|---|---|
| Standard carriage-mounted ram | hooked onto the carriage | hot-shrunk joint + weld | — | ≥ 3 times the capacity |
| Twin fork-mounted ram | fork-mounted | twin ram | — | CE 2006/42 |
| Ram with round-bar mounting | round-bar | grooved, twin | — | CE 2006/42 |
| Ram for high-temperature bodies | — | special, made to measure | high-temperature bodies | CE 2006/42 |
| Hydraulic mandrel for plastic reels | — | expanding, from the eye | hydraulic expansion + rotation | 2 quick couplings |
| Fork-mounted hydraulic cradle for reels | pedestrian stacker | manual hydraulic pump | — | — |
| Prongs for handling boats | — | made to measure | boat hauling and handling | — |
Coil booms: versions and uses
| Build | Assembly | Load | Note |
|---|---|---|---|
| Standard carriage-mounted | fork carriage | reels and coils | shrink-fit + weld; strength ≥ 3 times the capacity |
| Fork-mounted twin | on the forks | two reels per cycle, long bored loads | centre distance made to measure |
| Round-bar mounting | trucks without ISO/FEM carriage | reels and coils | also grooved or twin |
| High temperature | carriage or forks | hot coils and billets | materials chosen for the temperature |
| Hydraulic mandrel | carriage, 2 quick couplings | plastic reels from the bore | expansion and rotation, no marks |
| Hydraulic cradle | pedestrian stacker forks | reels rolled into the cradle | built-in hand pump |
The length and diameter of the coil boom are sized on the bore, width and weight of the reels; the truck's capacity plate and the type of carriage are also needed.
How to choose rams and reel handlers
Bore, width, weight
The coil boom is sized on the bore diameter, the reel width and the weight: with these data and the truck's capacity plate we define length, diameter and strength reserve.
Carriage-mounted, fork-mounted or round-bar
Carriage-mounted for continuous service; fork-mounted when the truck has to go back to its forks quickly; round-bar when the truck does not have an ISO/FEM carriage.
One or two reels
The twin boom doubles productivity in reel warehouses and supports long bored loads at two points; it requires a centre distance built on the reels and an adequate residual capacity.
Delicate surfaces
When the outer surface is the product, as in converting and plastics, the expanding mandrel grips from the bore and rotates without touching the outside.
Without a forklift truck
For departments where the truck cannot enter, the fork-mounted hydraulic cradle on the pedestrian stacker loads the reel by rolling it in and holds it during transport.
Rams and reel handlers: the most common questions
List price: the standard carriage-mounted coil boom starts from 1,600 € + VAT and the version with round-bar mounting from 1,800 €; twin, high-temperature, hydraulic mandrels and cradles are quoted on specification.
The one given on the capacity plate, sized on the customer's reels and on the residual capacity of the truck; the strength of the construction is never less than three times the rated capacity.
The standard coil boom bears on the bore; for plastic reels or reels with delicate surfaces the hydraulic expanding mandrel locks from the inside with uniform pressure, leaving no marks.
Yes, with the build for high-temperature bodies, designed on the temperature, cycles and dimensions of the bodies in the plant.
Yes: built to Machinery Directive 2006/42/EC, with CE marking, capacity plate and declaration of conformity.







