Forks and extensions
Forks for forklift trucks available from stock in the commonest sections, with standard, round-bar or roller mounting, and fork extensions certified to Machinery Directive 2006/42/EC and ISO 13284. For special duties: welded forks in high-strength steel and versions with a stainless steel covering for the food and chemical industries.
Replacement and special forks
Standard forks in the most common sections, ready in stock with ISO/FEM, round-bar or roller mounting; for heavy-duty applications or non-standard geometries, welded forks in Weldox 700/900, and for the food, pharmaceutical and chemical industries, forks with AISI 316L stainless steel cladding.
Fork extensions and fork shoes
ISO 13284 certified fork extensions, also nylon-coated for delicate loads, and the rounded fork shoe that turns the forks into a support for coils, rolls and tyres.
Forks and extensions: models, capacities and dimensions
| Model | Mounting / fitting | Build | Use | Certification |
|---|---|---|---|---|
| Standard forks for forklift trucks | ISO/FEM, round-bar or roller | — | common sections from stock | CE with certificate |
| Welded forks in Weldox 700 | — | Weldox 700/900 | — | CE with certificate |
| Forks with AISI 316L stainless covering | — | AISI 316L stainless to half the shank | 120x35x1200, class 2A | — |
| Fork extensions certified to ISO 13284 | — | standard or nylon-coated | — | 2006/42/EC + ISO 13284 |
| Rounded shoe for reels and tyres | slides onto the forks | made to measure | reels, rolls, tyres | — |
The versions: which fork for which job
| Build | When it is needed | Mounting | Supply |
|---|---|---|---|
| Standard forks | replacing a worn or bent pair | ISO/FEM, round-bar or roller | in stock in the common sections, CE certified |
| Welded Weldox 700/900 forks | heavy loads, extra-long forks, profiles to drawing | ISO/FEM or to specification | to order, qualified welds, certified |
| AISI 316L stainless-clad forks | food, pharmaceutical, chemical | class 2A (typical size 120×35×1200) | to order, other sizes on request |
| Fork extensions | loads deeper than the forks, occasional use | slide-on, locked with a pin | standard or nylon-coated, ISO 13284 capacity plate |
| Rounded fork shoe | reels, rolls, tyres | slides onto the forks | made to measure for the forks and the diameters |
Sizes are defined from the truck's capacity plate and the existing fork: mounting class, section and length.
How to choose forks and extensions
Reading the existing fork
Mounting class, section and length are stamped on the fork: with these three details we confirm availability from stock or manufacture to order. The residual capacity of the truck does not change if the fork has the same size.
Standard, Weldox or stainless
The standard fork covers normal work; Weldox 700/900 is needed when the load is heavy or the geometry is non-standard (long forks, reduced sections); AISI 316L stainless cladding when the load must not touch carbon steel.
Extensions yes, but with the capacity plate
The extension is fine for occasional deep loads: ISO 13284 requires a capacity plate with the residual capacity at the various lengths, and the load centre moves forward. For continuous use, a dedicated long fork is the better choice.
Coils and rolls
On bare forks a coil rests on two edges and tends to roll: the rounded fork shoe spreads the support over a curved band. For coils with a central bore, the coil boom is the better option.
Forks and extensions: the most common questions
It depends on section, length and mounting class: the common sections are in stock and quoted the same day; welded forks, stainless forks and extensions are quoted on specification. The quotation is free of charge.
Mounting class (ISO/FEM, round bar or rollers), section and length, stamped on the existing fork, plus the truck's capacity plate for the capacity.
Yes: manufactured in accordance with the Machinery Directive 2006/42/EC and ISO 13284, with certificate and capacity plate showing the residual capacity at the various lengths.
The catalogue forks have AISI 316L stainless cladding on half the shank over carbon steel: the same compliance for the food, pharmaceutical and chemical industries at a lower cost than a solid stainless fork.
Standard forks in stock are delivered immediately; special forks, extensions and made-to-measure fork shoes are built in Milan within the lead times stated in the quotation.





