Hooks and crane jibs for forklifts
Hooks and crane jibs that turn the forklift truck into a small mobile crane: from fork-mounted versions through to those hooked onto the ISO/FEM carriage, with a fixed, extending or tilting beam. Compatibility with the truck is always checked free of charge before supply.
Fork-mounted hooks and tow hooks
The short fork-mounted hook with screws or the long one with pins for slung lifts with the forklift, the 12,000 kg triple hook for long loads on three points and the carriage-mounted tow hook for trailers and trolleys.
Fork-mounted crane arms
The beam at fork height with a sliding hook collar, in fixed, manually telescopic or tilting version for panels: the forklift becomes a mobile crane.
Carriage-mounted crane arms
Fitted in place of the forks on the ISO/FEM, round-bar or pre-ISO carriage: more compact, with the load centre closer and more residual capacity; with fixed beam or with hydraulically controlled rotating hook.
Fork-mounted jib crane
The jib crane that slides onto the forks: slewing arm and hoist to serve an area around the truck.
Hooks and crane jibs for forklifts: models, capacities and dimensions
| Model | Mounting / fitting | Beam / hook | Capacity / use | Certification |
|---|---|---|---|---|
| Fork-mounted hook for forks | fast to the forks | short (screws) or long (pins) | — | CE 2006/42 |
| 12,000 kg triple fork-mounted hook | — | 3 | up to 12,000 kg | CE 2006/42 |
| Towing hook for forklift trucks | hooked onto the fork carriage | — | towing trailers and trolleys | CE with certificate |
| Fork-mounted fixed-beam crane jib | fork-mounted | fixed, movable hook collar | — | CE 2006/42 |
| Fork-mounted extending crane jib | — | extending by hand | per extension position (plate) | CE 2006/42 |
| Crane jib with tilting swing beam | — | swinging, adjustable angle | panels and angled loads | made to measure |
| Carriage-mounted fixed-beam crane jib | ISO/FEM, round-bar, pre-ISO carriage | fixed (extending on request) | — | CE 2006/42 |
| Carriage-mounted crane jib with hydraulic rotating hook | ISO/FEM carriage | rotating, hydraulic control | — | CE 2006/42 |
| Fork-mounted jib crane for forklift trucks | fork-mounted, secured behind the fork heels | — | on the residual capacity of the truck, shown on the capacity plate | 2006/42/EC, capacity plate and declaration of conformity |
Fork-mounted or carriage-mounted: the differences
| Build | Assembly | Load centre and residual capacity | When to choose it |
|---|---|---|---|
| Fork-mounted hook | on the forks, with screws (short) or with pins behind the heels (long) | close to the mast | occasional slung lifts with the forklift |
| Fork-mounted crane arm | on the forks, with sliding hook collar | further out: capacity decreases with outreach (capacity plate) | deep retrievals, workshop service, loads over obstacles |
| Carriage-mounted crane arm | in place of the forks, on ISO/FEM, round-bar or pre-ISO carriage | closer: more residual capacity at the same outreach | frequent use, loads at the limit of the truck's capacity |
| Hydraulic rotating hook | on the carriage, connected to the truck's hydraulic system | as the carriage-mounted version | precise positioning with orientation, from the driver's seat |
Compatibility with the truck is checked free of charge before supply: residual capacity, fork dimensions, stability.
How to choose hooks and crane jibs for forklifts
The residual capacity of the truck
A crane arm moves the load forward and the truck's capacity decreases with outreach: before choosing, the forklift's capacity plate and the weight of the load are needed. The check is free of charge and is done with the manufacturer's tables.
Fork-mounted or carriage-mounted
The fork-mounted version is fitted and removed in a minute and suits occasional use; the carriage-mounted version replaces the forks, lowers the load centre and gives more residual capacity: the choice for those who use it every day.
Fixed, telescopic or tilting beam
Fixed if the pick-up points are always the same; manually telescopic when the outreach changes often; tilting when the load does not lie flat, such as panels and parts resting at an angle.
Single or triple hook
The single hook is enough for crates and slung machines; the triple hook spreads the pull over three points and keeps long loads horizontal, up to 12,000 kg.
Orienting the load
With the hydraulic rotating hook the load is orientated from the truck's controls without touching it: for assembly work, formwork and machinery that has to be presented the right way round.
Hooks and crane jibs for forklifts: the most common questions
List price: the fork-mounted hook starts from 500 € + VAT, the fork-mounted fixed-beam crane jib from 2,500 €, the telescopic one from 2,600 €, the carriage-mounted fixed-beam jib from 2,300 €; special builds and the fork-mounted jib crane (3,500 €) are confirmed in the quotation.
It depends on the truck: the capacity of the jib is given on the capacity plate for each outreach position, but the limit is the residual capacity of the forklift truck, which we check free of charge with dedicated tables.
The fork-mounted versions fit the forks of every truck; the carriage-mounted versions require an ISO/FEM carriage, a round-bar mounting or a pre-ISO carriage. We check compatibility before supply.
Only for the hydraulic rotating hook, which is connected to the truck's hydraulic system with quick couplings; all the other versions are mechanical.
Yes: every hook and crane jib is built to Machinery Directive 2006/42/EC, with CE marking, capacity plate and declaration of conformity.









