Steel gantry crane, mobile on wheels, 6,000 kg

The 6,000 kg mobile steel gantry crane is the A-frame gantry for heavy loads that must still be movable: steel structure on wheels, electric wire rope hoist and trolley, and screw-type outriggers that secure and level it when the floor is not true. Beyond the GP series, for workshops, maintenance and assembly, list price 15,000 € + VAT.
Six tonnes is beyond the GP series table, which stops at 5,000 kg: the structure is sized for each case with reinforced legs and cross-beam, and lifting is entrusted to an electric wire rope hoist with electric trolley, better suited than the chain hoist to heavy loads and greater heights.
The screw-type outriggers at the four corners transfer the weight to the ground during lifting and level the crane where the floor is not perfectly flat: position it, screw down the outriggers, lift. To move it, raise them and it is back on its wheels.
It is the crane for heavy vehicle repair shops, machine tool maintenance, steel fabrication assembly and departments where there is no overhead travelling crane or it does not cover the area. Height, span and hook travel are defined on the customer's building and workpieces.
Finished with anti-rust primer and two coats of enamel, certified to 2006/42/EC with capacity plate and declaration of conformity. For even higher capacities or travelling under load, the rail version with powered wheels is considered.
| Rated capacity | 6.000 kg |
| Structure | steel, on wheels, with screw-type outriggers |
| Lifting | electric wire rope hoist with electric trolley |
| Sizes | height and span to suit the building |
| Use | workshops, maintenance, assembly |
| Certification | 2006/42/EC, capacity plate and declaration of conformity |
Custom-built: every piece of equipment is custom-built and certified to CE 2006/42. Request a quotation for your exact configuration and capacity.
Data sheets
Steel gantry crane, mobile on wheels, 6,000 kg: the most common questions
List price 15,000 € + VAT with electric wire rope hoist and trolley; height and span are defined in the quotation.
To transfer the weight to the ground during lifting and to level the crane on floors that are not true: the structure does not bear on the wheels but on the four screwed-down supports.
Yes, unloaded, on its wheels; with the outriggers raised it is pushed to the new position. To move it with the load, the powered rail version is needed.




