Rail-mounted gantry crane with powered wheels, 2,000 kg

The 2,000 kg rail-mounted gantry crane with powered wheels is the self-propelled gantry: two electrically driven wheels and two idle wheels on a rail fixed to the floor, so the crane travels with the load raised along the whole runway and replaces an overhead travelling crane on columns without touching the roof. For stone masons, cutting centres and production, list price 11,000 € + VAT.
The difference from the swivel-castor crane is the rail: the floor runway guides the crane and allows it to be moved with the load suspended, controlled from the pendant together with the hoist and trolley. The rail length defines the area served, which can cover an entire department.
The drive on two wheels, with the other two idle, is sized on the weight of the crane and the load; crane travel, lifting and trolley travel are controlled from the same pendant, with radio remote control on request. The electric chain hoist is chosen on capacity and speed.
It is the solution for stone masons and companies that move slabs and blocks between the saw, the yard and truck loading, and for departments where an overhead travelling crane on columns would cost too much or cannot be installed. Height, span and rail length are defined on the layout.
Steel structure finished with anti-rust primer and two coats of enamel, rails supplied and fixed to the floor, 2006/42/EC certification with capacity plate and declaration of conformity. Capacities other than 2,000 kg are quoted on request.
| Rated capacity | 2,000 kg |
| Travel | on floor rail, 2 powered wheels + 2 idle, with the load |
| Controls | pendant control; radio remote control on request |
| Lifting | electric chain hoist with electric trolley |
| Sizes | height, span and rail length to suit the layout |
| Use | stone masons, cutting centres, production, yards |
| Certification | 2006/42/EC, capacity plate and declaration of conformity |
Custom-built: every piece of equipment is custom-built and certified to CE 2006/42. Request a quotation for your exact configuration and capacity.
Data sheets
Rail-mounted gantry crane with powered wheels, 2,000 kg: the most common questions
List price 11,000 € + VAT; rail length, height and hoist define the final price.
Yes, with the rail fixed to the yard and an outdoor paint finish; motors and controls are protected. For a marine environment the specific treatment is applied.
As long as needed to cover the working area: the rail is supplied and fixed to the floor in sections, and the power supply follows the crane along the whole travel.




